YakAttack CellBlok Review: Clean Power for Kayak Fish Finders
Caney Fork Outdoors
YakAttack CellBlok Review: Clean, Removable Power for Your Fish Finder
If you run electronics on your fishing kayak, you already know the pain of messy wiring, awkward battery placement, and drilling more holes than you’d like. The YakAttack CellBlok is designed to solve exactly that problem.
In this in-depth review, we’ll break down how the CellBlok works, why it’s become a favorite among kayak anglers, and who will benefit most from adding it to their rig.
What Is the YakAttack CellBlok?
The YakAttack CellBlok is an all-in-one mounting and battery box system designed specifically for kayak electronics. It gives you a compact, removable platform to hold your fish finder head unit, transducer arm, and battery — all without running wires throughout your hull.
Key idea: instead of spreading components all over your kayak, the CellBlok centralizes everything in one tidy, track-mounted package.
Core Features
- Hard-sided battery box with hinged lid
- Side mounting surfaces for fish finder mounts and accessories
- Integrated cable pass-throughs
- Compatible with popular track systems on modern fishing kayaks
- Designed to pair with YakAttack’s SwitchBlade transducer arm and fish finder mounts
Design and Build Quality
YakAttack is known for making kayak fishing accessories that are tough, thoughtfully engineered, and purpose-built. The CellBlok follows that pattern.
Materials and Construction
- Durable polymer housing stands up to sun, spray, and abuse on the road and water.
- Stainless hardware resists corrosion in both fresh and saltwater.
- Secure latch and hinge keep your battery protected but easily accessible when you need to charge or swap it.
Everything about the CellBlok feels like it was designed for anglers who are on the water a lot — not just a generic plastic box repurposed for kayaks.
Smart, Compact Footprint
The box is compact enough to sit cleanly beside your seat or in front of your feet on your kayak’s gear tracks, but large enough to house a typical 12V kayak electronics battery.
The low-profile design:
- Keeps your deck uncluttered
- Minimizes snag points for lines and nets
- Stays out of the way when you’re standing to fish
Mounting and Installation
One of the biggest selling points of the YakAttack CellBlok is how easy it is to install and reposition — especially compared to traditional through-hull wiring jobs.
Track-Mounted Convenience
The CellBlok is built to mount on most standard kayak gear tracks. Once you slide it into your track and snug down the hardware, it becomes the central hub for your electronics.
Advantages of track mounting:
- No extra holes in your kayak for wires, switches, or mounting plates
- Simple to reposition forward or backward to dial in your reach and deck layout
- Easy to remove for transport, storage, or charging
Pairing With a Fish Finder and Transducer
The typical CellBlok setup looks like this:
- Fish finder head unit mounted on top or beside the CellBlok using a YakAttack mount or similar.
- Transducer attached to a YakAttack SwitchBlade Transducer Deployment Arm or comparable unit bolted to the side of the box.
- Battery stored safely inside the CellBlok, with short wire runs to the head unit and transducer.
Everything stays together as one integrated package. When it’s time to load up, you just slide the CellBlok out of the track and bring the entire electronics system with you.
Cable Management and Battery Storage
If you’re tired of dealing with long wire runs, loose cables, or batteries sliding around inside your hull, the CellBlok feels like a major upgrade.
Clean Wiring
- Short, direct wire runs from the battery to your fish finder
- Cables contained within or alongside the box instead of stretched through the boat
- Less chance of chafing, water intrusion, or snagging on gear
The result is a clean, professional-looking electronics install that’s much easier to troubleshoot or modify later.
Battery Protection
Inside the CellBlok, your battery is:
- Shielded from direct splash and impact
- Held in a defined space instead of sliding around
- Easy to access for charging via the hinged lid
Whether you’re using a sealed lead-acid battery or a lightweight lithium option, the CellBlok gives it a secure home right on deck.
On-the-Water Performance
The real test of any kayak accessory is how it behaves on the water. The YakAttack CellBlok excels in everyday use.
Stability and Balance
Because the CellBlok rides low and close to the deck, it has very little impact on your kayak’s stability. Most anglers mount it just forward of the seat or alongside their legs, where:
- The weight is easy to balance
- Cables stay tidy and out of the way
- It’s simple to reach the fish finder controls while fishing
Easy Removal at the End of the Day
One of the best parts of the CellBlok system is pack-up time:
- Loosen a couple of knobs
- Slide the CellBlok off the track
- Carry your entire electronics setup — fish finder, transducer, and battery — in one hand
There’s no crawling into the hull, unplugging hidden wires, or lifting a wet battery out of the stern. This convenience alone is a major reason many kayak anglers upgrade to a CellBlok-style system.
Ideal Use Cases
The YakAttack CellBlok shines in several common scenarios:
1. Multiple Kayaks, One Fish Finder
If you run more than one kayak, the CellBlok makes it incredibly easy to:
- Move the same fish finder and battery between boats
- Skip duplicate installs and wiring jobs
- Keep each kayak’s hull clean and uncluttered
2. Rental or Demo Kayaks
For outfitters and dealers, a CellBlok setup lets you:
- Quickly equip demo or rental kayaks with electronics
- Remove the entire setup at the end of the day
- Protect your investment by storing everything indoors
3. Anglers Who Don’t Want to Drill Holes
Many paddlers hesitate to drill into a brand-new kayak — especially high-end fishing models. With the CellBlok, you can:
- Mount your electronics using existing tracks
- Avoid permanent modifications
- Preserve the resale value of your boat
Pros and Cons
Pros
- Clean, centralized solution for kayak electronics
- Track-mounted design avoids drilling new holes
- Easy to remove for charging, transport, and storage
- Excellent cable management and battery protection
- Ideal for anglers who use multiple kayaks
- Pairs perfectly with YakAttack transducer arms and mounts
Cons
- Adds some weight to the deck in one concentrated spot
- Requires available gear tracks for mounting
- Box size may be tight for oversized batteries
Who Is the YakAttack CellBlok Best For?
The YakAttack CellBlok is a great fit for:
- Kayak anglers adding electronics for the first time who want a clean, low-hassle install.
- Anglers with multiple kayaks who’d rather move one electronics package between boats.
- Paddlers who dislike drilling into their hulls and want to keep their rigs as close to factory stock as possible.
- Outfitters and shops who need a removable, professional-looking electronics setup for demos and rentals.
If you’re all-in on kayak fishing and want your electronics to be organized, protected, and easy to manage, the CellBlok is a smart upgrade.
Final Thoughts and Where to Buy
The YakAttack CellBlok solves a long-standing headache in kayak rigging: how to power and mount your fish finder without stuffing wires all over your boat. With its track-mounted design, integrated battery box, and clean cable management, it offers a professional, removable solution that works across a wide range of fishing kayaks.
For anglers who value a tidy deck, quick setup, and easy end-of-day tear-down, the CellBlok is hard to beat.
You can check current pricing and availability or add the YakAttack CellBlok to your rig here:
