Pedal, Paddle and Power options are all here now with the introduction of the Jackson Kayak Flex Drive E Motor Kit! Compatible only with Flex Drive-equipped boats from Jackson, including our Jackson fishing kayaks and Blue Sky boats, the Flex Drive E is an electric drive that interchanges with the pedal drive unit in seconds to offer users an alternative, effortless power source. Compact and weighing less than eight pounds, the FD-E stores within the boat's hatch along with battery and cables making installation instant and with no drilling or motor brackets needed. The FD-e comes ready to work with 12 or 24V deep cycle or lithium battery.

The rugged FD-e motor is housed in an injection-molded case that is marine-ready and maintenance-free. Forward-reverse and speed are controlled by a single knob - even a novice can connect and operate Flex Drive E in minutes. With the flexibility to run under the power of a lithium or deep-cycle battery, the Flex Drive E greatly extends the on-water range for every user. Included in the kit:

• (1) - Motor Unit
• (2) - Killswitch Keys
• (1) - Battery Cable
• (2) - 3/8” Heat Shrink Insulated Ring Terminals
• (1) - Specifications Stickers
• (1) - Owner's Manual

Note: You will need to have our two-bladed 10 x 10 Pitch Pedal / 12V Prop installed for maximum efficiency with a 12V battery. The 10 x 10 prop is the optimal prop for pedaling your boat, as well. If you are running 24V, use our 9 x 5 Pitch / 24V Prop for optimal performance. The two-bladed 10 x 10 prop has been standard on our boats since 2019; if you have a three-bladed prop we highly recommend using the correct prop listed above. Battery not included.